|
For more information, please refer to details.
Films
- Maximum standard size : 32” x 48”/812.8 x 1219.2 mm
- Special long film size : 18” x maximum of 400”
|
Panel sizes
- 6 x 304.8 mm 9” x 12” = 228
- 12” x 18” = 304.8 x 457.2 mm
- 18” x 24” = 457.2 x 609.6 mm
- 24” x 48” = 609.6 x 1117.6 mm
|
Exposure
- Special exposure size: 36” x 385”
|
Etching precision and tolerances
- Minimum width line and spacing : 2 mil
- Minimum etching tolerances ± 10 µm
|
Plasma etching
- Programs for desmear, back-etch and teflon materials
|
Plating
- Maximum aspect ratio : 10
- Pulse plating
|
Drilling and milling diameters and tolerances
- Minimum drilling diameter : 0.1 mm
- Minimum corner radius milling : 0.4 mm
- Depth milling and drilling tolerance : + 0.05 / 0 mm
- Optical alignment
|
Finish
- Chemical Nickel / Gold standard : 5 / 0.05 µm
- Chemical Nickel / Gold special for wire bonding : 5 / 0.5 µm
- Chemical Nickel / Gold special for wire bonding : 5 / 0.5 µm
- HAL
- Galvanic Sn
- Galvanic Au
|
Soldermask
- Dry film solder mask thickness : 2 or 4 mil
|
|